Casing O.D.:
4.5"
5"
5.5"
6 - 5/8"
7"
7 - 5/8"
8 - 5/8"
9 - 5/8"
Select OD first, then weight ====>
WARNING: This is not a defined API casing.
Please review with engineering.
Casing Steel Density:
Non-API Casing ID Range:
Max ID:
Min ID:
Avg ID:
+/-:
Tubing Size:
ALL
----
20 --- 2-3/8" OD (60.3 mm), 2" ID
25 --- 2-7/8" OD (73.0 mm), 2.5" ID
30 --- 3-1/2" OD (88.9 mm), 3" ID
Pump Bore:
106 --- 1 1/16" (26.9 mm)
125 --- 1-¼" (31.8 mm)
150 --- 1-½" (38.1 mm)
175 --- 1-¾" (44.5 mm)
200 --- 2" (50.8 mm)
225 --- 2-¼" (57.2 mm)
250 --- 2-½" (63.5 mm)
275 --- 2-¾" (69.9 mm)
300 --- 3" (76.2 mm)
325 --- 3-¼" (82.55 mm)
375 --- 3-¾" (95.3 mm)
425 --- 4-¼" (107.95 mm)
450 --- 4-½ in. (114.3 mm)
WARNING: Anchor must be set above the pump.
This will only affect thrust & load calcs. Anchor sizing is unaffected.
Optional Parameters
WARNING: Fluid Level must be at or above the pump.
Anchor sizing is unaffected.
Assembly Number
Fluid Load ( Fo )
Anchor Thrust
Anchor Loading
Tool OD
Anchor Piston
Tubing Diameter
Notes
LBS
(+30%)
LBS
"
"
"
Additional Info:
( 1/kt ):
Tubing Stretch
If Unanchored:
Below Anchor:
Lost Bbls/Day (Unanchored):
Anchor Δ PSI:
Could not match an anchor to your specifications.
Did not match an anchor to the Casing OD & WT and Tubing Size. (Try setting the Tubing Size to "ALL" )
Did not match ANY Casing OD.
Did not match ANY Casing Weight.
Did not match ANY Tubing Size.
Note: Anchor Loading = (Fo / Thrust) * 100
Black Gold recommends factoring 130% of the fluid load when determining the applicable anchor loading.
Blow Drain Info:
Operating Pressure @
--- ft. TVD:
--- PSI
---
Static Pressure @
--- ft. TVD:
--- PSI
---
To determine the required surface pressure to blow the drain, subtract the static pressure from the drain's rated pressure.
Note: Please verify all calculations.
WARNING: Drain must be at or above the pump.
Email Black Gold Regarding This Anchor
Link